APPLIANCES
MATTRESSES
ELECTRONICS
FURNITURE
Shop By Brands
Rebates
Financing
About Us
Blog
2.5
Special Financing
Buy now, pay later with convienent monthly payments with special financing and approved credit. We have teamed up with Wells Fargo to give you a simple way to make your purchase with no hidden fees.
Smart Buy Protection
Protect your new product long after the manufacturer's warranty ends. Our protection plans provide you with extended coverage and peace of mind.
Haul Away & Local Delivery
We provide local in-home delivery for products big and small. For your convenience, we also can haul away and recycle your old products at the time of delivery.
- Style:
- Icemaker Kits
When a floor drain is not available, order the UPK3 drain pump kit
The pump must be installed inside the unit and can pump to a maximum vertical height of 10 feet. (10 feet of tubing is supplied with the kit)
The pump must be installed inside the unit and can pump to a maximum vertical height of 10 feet. (10 feet of tubing is supplied with the kit)
| WEIGHTS & DIMENSIONS | |
| Approximate Shipping Weight | 7.76 lb |
| Net Weight | 6 lb |
| Install GUIDE.pdf | Click here to download |
|---|---|
| Manuel INSTALLATION.pdf | Click here to download |
| Installation Instructions | Click here to download |
| Installation Instructions | Click here to download |
Enter Your Review:
Fields marked with an asterisk (*) are required.
Showing Page 1 of 0
Easy To Install
by cbarhorst
Submitted 07-02-21
done Yes, I would recommend this to a friend
www.ge.com
The pump arrived well-packaged. Installation went without a hitch. I thought the included installation instructions were easy to follow. I thought the pump was quiet even with the ice maker not pushed back into the cabinet. Great product!
Overall Rating:
Performance:
Appearance:
Value: 
Horrible Product Design!
by bpickjr61
Submitted 11-18-20
clear No, I would not recommend this to a friend
www.ge.com
The pump is required for the 15" Ice Maker (Model UNC15NJII). Items were delivered and upon opening box with pump discovered that the BRASS Discharge Elbow was broken off below the threads on the PLASTIC Stem where the the discharge elbow was attached. NOTE: It doesn't surprise me that a heavy BRASS fitting will break off the PLASTIC stem, and I'm not an engineer.
Overall Rating:
Performance:
Appearance:
Value:
Annoyingly Loud!
by GregPS
Submitted 08-01-20
clear No, I would not recommend this to a friend
www.ge.com
The pump is so loud that it gets everyone’s attention 2 rooms removed.
Overall Rating:
Performance:
Appearance: 
Value:
